banner7.jpg

Desktop Engineering Blog

3 Ways to Improve Aircraft Design and Production

Posted by Geoff Haines on 10-May-2016 17:00:00

Producing 38,000 new aircraft over the next 20 years is a big ask. The amount of time and effort that goes into producing a single aircraft is high enough, so when we think of producing another 37,999, the pressure mounts.

That's why OEMs and suppliers need to be on top form when it comes to aircraft production. Unless the activities of suppliers and OEMs are managed properly, the delivery of these new aircraft may be significantly delayed. 

Read More

Topics: Aerospace - CATIA

3 advantages of CATIA in Aerospace Composite Design and Manufacturing

Posted by Geoff Haines on 28-Apr-2016 15:00:00

Designing and manufacturing aerospace parts is complicated enough without having to worry about the structural integrity of parts. This is where the use of composite materials can take some of the pressure off.

Composite materials enable the production of lightweight, impact resistant parts compared to alternative metals. This allows OEMs to produce higher quality parts, which is particularly important for aircraft when we consider safety protocols. 

Read More

Topics: Aerospace - CATIA

The benefits of re-shoring the supply chain

Posted by Geoff Haines on 04-Feb-2016 15:00:00

One of the main reasons for moving manufacturing overseas has been to reduce costs. But today many OEMs are re-shoring the supply chain as going overseas no longer affords the costs advantages it used to.

For example, many companies used to benefit from off-shoring their manufacturing to China due to the low cost of labour. But increasing wages in China are prompting many businesses to bring manufacturing closer to home.

But it’s not only increasing wages pushing manufacturers to re-shore the supply chain. Re-shoring creates jobs and helps to boost the local economy. For example, Boeing are expanding their operations in St. Louis to develop parts for the Boeing 777X, beginning in 2017.

Read More

Topics: Aerospace - CATIA

Making the most out of the aerospace supply chain

Posted by Geoff Haines on 29-Jan-2016 15:00:00

With OEMs under pressure to deliver 38,000 new aircraft over the next 20 years, suppliers need to be on top form when it comes to aircraft production. And unless the activities of suppliers and OEMs are managed properly, the delivery of these new aircraft may be significantly delayed. 

OEMs often make demands on suppliers that are not manageable, but the potential for a new contract means suppliers may not want to turn it down. For example, in aerospace, OEMs are shifting design responsibilities onto tier 1 suppliers who don’t often have much experience in this area.

Read More

Topics: Aerospace - CATIA

3 trends for Aerospace and Defence in 2016

Posted by Geoff Haines on 21-Jan-2016 15:00:00

As we progress through 2016 and beyond, the aerospace and defence industry is set to experience a huge growth in revenue. From the large number of orders OEMs have received to produce new aircraft over the coming 20 years, to the Joint Force 2025 Initiative in defence, the aerospace and defence industry is set to be busy.

So as we begin 2016, we’ve come up with 3 trends that we see developing in aerospace and defence in 2016.

Read More

Topics: Aerospace - CATIA

How environmental pressures affect aerospace design and manufacturing

Posted by Geoff Haines on 07-Jan-2016 18:00:00

Designing and manufacturing aircraft is complicated enough as it is, but governmental calls for more environmentally friendly aircraft can make aircraft design even tougher.

For example, the UK government have included the aviation industry in their plans to reduce carbon emissions significantly by 2050. And with the cost of fuel as a percentage of operating costs for airlines significantly greater than it was a decade ago, aircraft manufacturers need to take steps to increase the fuel efficiency of aircraft and comply with governmental calls for more environmentally friendly aircraft.

Read More

Topics: Aerospace - CATIA

Why training is important in aerospace design and manufacturing

Posted by Geoff Haines on 05-Jan-2016 15:00:00

As orders for new aircraft have come in thick and fast, OEM’s and suppliers are needing to find better ways to produce aircraft more efficiently. But doing this requires a significant investment into training the workforce to be able to keep up to date with advances in technology and the use of new design and manufacturing tools/methods to get the job done. 

Other factors such as global competition and the significance of aircraft safety are particular reasons why suppliers need to ensure that they have a skilled workforce who will be able to face today’s challenges of aircraft design and manufacturing.

Read More

Topics: Aerospace - CATIA

Developing trends in the aerospace supply chain

Posted by Geoff Haines on 23-Dec-2015 16:11:00

As aircraft manufacturers receive more and more orders for new aircraft, suppliers need to react and increase their efficiency to ensure this increased demand can be managed effectively.

This has triggered a number of changes in the supply chain that influence the activities of OEMs and suppliers. This includes how OEMs are re-shoring their supply chain, how OEMs are now placing design responsibilities on tier 1 suppliers and how OEMs and suppliers are reassessing their relationship to improve efficiency in design and manufacturing.

Read More

Topics: Aerospace - CATIA

5 benefits of 3D Printing for Aerospace design and manufacturing

Posted by Geoff Haines on 18-Dec-2015 15:00:00

As consumer air travel increases, the demand for new aircraft to keep up has led to orders of nearly 38,000 new aircraft over the next 20 years. The problem is that OEM’s and suppliers are struggling with finding cost-effective ways to produce these aircraft as quickly as possible. But that’s where 3D printing comes in.

3D printing allows aerospace designers and manufacturers to create a variety of aircraft parts with complex geometries, cost effectively and quickly. So here’s some of the benefits of 3D printing for aircraft production.

Read More

Topics: Aerospace - CATIA

4 benefits of Composite Materials in Aerospace Manufacturing

Posted by Geoff Haines on 11-Dec-2015 15:00:00

Finding ways to produce aircraft cost-effectively is challenging enough as it is. But now aircraft manufacturers are under increasing pressure to comply with strict environmental regulations to reduce carbon emissions – which is compounded by the need to continually lower costs. But there are ways that aerospace companies can produce aircraft cost-effectively and be more environmentally-friendly.

One method suppliers have employed to combat high costs and high carbon emissions is their use of composite materials in the development of aircraft parts. For example, due to their lightweight structure, composites are able to increase fuel efficiency and hence reduce an aircraft’s carbon footprint.

Read More

Topics: Aerospace - CATIA